EAAGD Wireless Remote Digital Cooking Meat Thermometer with Dual Probe for Kitchen Barbecue Oven Food Surveillance within 70M

Sale Price: $$24.49
Old Price: $$48.98
Product Description
Evaluate Score: 4.9
Package Type: piece
Lot Number: 1


【Sensor Probe Lifetime Warranty】Our probe is made of food-grade stainless steel, which can meet the IPX7 waterproof standard. Improper use or exposing to high temperature too long may result in incorrect temperature readings. In such case, please feel free to contact us, and we will provide you with a new sensor probe for free!

【Remote Monitoring Alarm 】The wireless digital barbecue thermometer with alarm can monitors the temperature of food or oven within 230 feet (70 meters), so that you don’t have to keep your eyes on the food all the time, making time for other works.

【Multi-purpose】 Thermometer measuring range up to -20 ℃ ~ 300 ℃ (-4 ~ 572 ° F), which can arbitrarily meet your preferences for food ripeness. The thermometer has count and countdown function to avoid over cooking.

【Fast and Accurate Temperature Measurement】 The thermometer can read the temperature value within 7 seconds and transmit it to the receiver in your hand in real time.


Packing list:
  1 x digital thermometer receiver
  1 x digital thermometer transmitter
  2 x food / oven temperature probe
  1 x instruction manual


  The main technical parameters
     1.Wireless transmission distance: up to 230ft (70 meters)
     2.Dual probe temperature display
    3.Probes and leads can withstand temperatures up to 716 ° F (380 ° C) and comply with IPX7 waterproofing standards
    4.Alarm function
    5.℃ / ℉ temperature display unit selection
    6.Temperature range: -20 ℃ ~ 300 ℃ (-4 ~ 572 ℉)
    7. 9 hours 59 minutes 59 seconds Countdown timer
   8.Backlight automatically shut down after 10 seconds, without any operation

  Receiver function introduction
    1.MODE-Press” MODE” to select from the three modes: “PROBE 1”, “PROBE 2” or “TIMER”
    2.MEAT – Select the preset type of meat; or set the hours of the timer at the “TIMER”mode
    3.TASTE – Press “TASTE “to select the meat grade: WELL, MED WELL, MEDIUM, MED RARE, RARE
MIN / ° C / ° F -In “PROBE 1” or” PROBE 2 “modes, long press “MIN/℃/℉” for 2 seconds to switch between ° C and ° F; In “TIMER” mode, set minutes for the timer.
   4.CLEAR – In “TIMER” mode, clear the time set
   5.In “TIMER” mode, set seconds for the timer.
   6.START / STOP – In “PROBE 1 “or “PROBE 2 “mode, press “START / STOP “once to turn on or off the temperature alarm. Long press “START / STOP” for 2 seconds to enter to the “TEMP SET”(setting manually) for” PROBE 1 “or” PROBE 2”.

 Transmitter function introduction
   1.℃ / ℉ – Press “℃ / ℉”once to switch between ℃ and ℉
   2. LIGHT / ON – Press“LIGHT / ON” to turn on or off the signal transmission (when the signal transmission is on, the signal identification will flash); Long press“LIGHT / ON” for 3 seconds to turn on or off.

 How to SET target temperature (TEMP SET) :
   1.Press “MODE” to select the thermometer MODE: “PROBE 1” or “PROBE 2”
   2.Long press “START/STOP” for 2 seconds to enter to manual setting mode (numerical flicker). Press “MIN” or “SEC” to set temperature.
   3.After finishing setting, press “START/STOP” button to turn on/off the temperature alarm setting. When the temperature alarm setting is turned on, it will display on the screen.
   4.When the temperature of “PROBE 1” or “PROBE 2” reaches the preset level, the receiver will make a beeping sound, and the red liquid crystal backlight will be on. Press any button to stop the beeping.

  How to set the timer (TIMER)
    1.Press “MODE” to switch to “TIMER” mode. The screen will show “TIMER ▲”, with default setting 0H00M00S or “TIMER ▼” (countdown)
    2.Press “MEAT” to set hour; press MIN” to set minute; press “SEC” to set second. After setting, press “START / STOP”
    3.When the timing or countdown is over, the receiver emits an alarm and the alarm icon flashes. You can stop the alarm and flash by pressing any button, or press “Clear” to reset.

   1.If the receiver and transmitter show LLL or HHH instead of the probe temperature, you need wait for the probe to reach the current temperature. If it still shows LLL or HHH after a long time, or wrong temperature, insert the probe into the transmitter and twist them back and forth to make good contact. If the problem persists, the internal probe wire may be short-circuited due to moisture or thermal damage.
   2.The probe can’t keep in water for a long time
   3.The probe or probe lead can’t contact the flame directly
   4.Reposition the tip of the probe in the center of the thickest part of the food to avoid contact bones.


  • Most of the parcels will be shipped via Aliexpress official shipping method.
  • We are not responsible for the delivery time. It normally take 10-25 working days to US EU countries; 20-60 days to rest of the world.
  • All items will be dispatched within 24 hours after payment process is completed.
  • We are not responsible for any VAT or custom charges.
  • If you do not receive your parcel after 45 days, please contact us and we will check with our agent. If you do not receive after 60(Brazil-90) days, we will issue refund to you.

Please feel free to buy

  • All products have 18 months warranty from our store.
  • Please do not open dispute or leave negative feedback without talking to us. We value our customers as well as our feedback profile.
  • If we ignore your message or we can not solve your problem, you can open dispute